LXE Akerstroms Tx700, Руководство по настройке, Страница: 34 / 146

Trux Manager Trux Configuration Guide
34 E-EQ-TRUXCONFIG-D-ARC
Startup
Select optional ways to power up the Tx700:
•
by touch panel tap or
•
by applying power to the terminal.
If touch panel tap is selected, you have the possibility to set the tap duration before terminal start time.
Default value is 1 second (1000 ms).
Shutdown
Select touch panel tap as an optional way to shutdown the terminal. You have the possibility to set a tap
duration before terminal shutdown time. Default value is 2 seconds (2000 ms).
Important! When this shutdown option is selected, firmware will issue a power button event. This means
that a touch panel tap performs the same function as the power button. See the Advanced tab of the Power
Options Properties in Windows Control Panel for power button configuration. The default value in a
Tx700 Windows image is shutdown.
Defroster
Enable defroster (heated touch panel). This option is only relevant if the terminal is equipped with an
optional heated touch panel. The default value is defroster enabled.
The defroster will turn off when the temperature goes above 40°C inside the terminal and turn on again
below 39°C (default values).
Note! Before making any changes to the default values, remember that the temperature outside
the terminal is typically 20°C lower than inside.
Apply Factory Settings
Clicking this button restores all customized settings to their default values after the terminal has been
shutdown and restarted.