LXE 9000A3775, Руководство пользователя

Страница: 3 / 64

IMPORTANT SAFETY WARNINGS US
SAVE THESE INSTRUCTIONS
This document contains important safety and operating instructions for the LXE Multi-Charger Plus. Please read all
instructions and cautionary markings on the charger/analyzer itself before putting the unit into service.
Safety Alert Symbols
!
This symbol is used to call your attention to instructions concerning your personal safety.
Watch for this symbol – it will alert you to important safety precautions that must be
observed to avoid death, personal injury or property damage. Follow the instructions after
the warning symbol and be alert to the possibility of personal injury or death.
These signal words provide users with information about the seriousness of the hazard involved:
DANGER WARNING CAUTION
Indicates imminent hazards
which, if not avoided, WILL
result in severe personal
injury or death. Indicates potential hazards
which, if not avoided,
COULD result in severe
personal injury or death. Indicates hazards or unsafe practices
which, if not avoided, COULD result in
minor or moderate personal injury or
property damage.
Safety Instructions
Setting up the Multi-Charger Plus
Locate or orient the AC cord so that it will not be stepped on, tripped over or subjected to damage or stress.
Analyze or charge only LXE part no. 156213-0001, 158224-0001 and 159922-0001 Rechargeable Lithium Ion
Battery Pack in this charger/analyzer. Other batteries or battery packs may burst causing injury or property damage.
Operating the Multi-Charger Plus
Only users who have read and understand all operating instructions are qualified to operate the Multi-Charger Plus.
Failure to read, understand and follow safety instructions may result in injury or death.
Keep the rear of the charger/analyzer free of obstacles and do not block the rear ventilation slots. The
charger/analyzer generates internal heat during charging.
Keep the charger/analyzer away from any heat source. Excessive internal heating can ruin the charger/analyzer.
Use care when inserting battery. Do not “slam” or slide the battery into the pocket, this could damage the
charger/analyzer.
Keep dirt and foreign objects out of the battery pocket. Do not short circuit any of the contacts in the battery pocket,
this could result in injury or property damage.
Do not operate the charger/analyzer if it has been dropped or damaged in any way. Return the charger/analyzer to
LXE.
Storing the Multi-Charger Plus
Disconnect charger/analyzer by pulling the plug; not the cord.
Maintaining the Multi-Charger Plus
Service should be performed by trained persons only. Return the charger/analyzer to LXE.