LX5000 March 2002
page 42
3.4.4.5
TSK END
After reaching the finish zone the task stops automatically. A very typical message
TSK END
will appear.
It is posssible to start a new task (during the flight) after TSK END, using the RESTART procedure.
3.4.4.6
Procedure after landing
FAI regulations require a straight line by barogram at the beginning and at the end. This is the reason that we
recommend not to switch off the LX5000 immediately after landing. Apr. after 3 minutes a very typical message will
appear on the screen.
CALCULATING SECURITY.
The mentioned message will remain for some seconds (depends on log time and flight time). After the procedure is
finished the logger data is safe.
Never switch off the unit during the CALCULATING SECURITY.
A very typical sign that the procedure is finished is
logbook instead of statistics page.
If the unit is accidentally switched off immediately after landing, there will not be any problems. After switching it ON
again the calculating security will start at first.
3.4.4.7
SIMPLE TASK
Simple task is active all the time
before a regular task is started
. The function is very useful for the pilots who do not
fly tasks, but fly from TP to TP (the same as flying to APT). Simple task will bring similar statistics like a real task and
the same holds true for flight evaluation using PC.
Immediately after take off, the current position is taken as the start point. Reaching an achievable TP or APT (has to be
selected in TP or APT) the point is taken as a confirmed TP and so on. The radius to define confirmation is set by pilot
in „NEAR TP“. The simple task is growing on collecting points. The flight statistics is practically the same as a regular
task.
TSK S
shows that no regular task is flown.
After RESTART procedure the simple task will be restarted and present position will be taken as a new start.
