Rev 1.1, 18.09.2021
12
Working Mode
1.
Press the power switches of the two scales to turn on the power of the scales.
2.
Press [ON/OFF] key on the indicator to turn on the indicator. The bluetooth LEDS on
the indicator and the scale body both change from flashing to bright, indicating that the
indicator and the scale body are connected successfully. The indicator will display a
string of self-
checking characters from ‘PL===’ to “PL---” “Pr---”“33333” for a few
seconds and “------”then 0.00, now the scale enter the WEIGH mode.
Cautions
1. if you press the [on/off] key on the indicator to turn on the indicator, the bluetooth
indicator on the indicator will always flash, and the indicator will always display the
self-test character of "PL = = ="or "Pr = = ="
The reason for this phenomenon may be that the power switch of the left scale
body or right scale body
isn’t turned on. Another possibility is that the battery of the
scale body is too low, please charge in time.
2
．
When the sign “
” is lit, it indicates the indicator is low battery.
When the sign “
” is Slow flicker it indicates the left scale body is low battery.
When the sign “
” is
Fast flashing, it indicates the right scale body is low battery.
Please charge the battery for 4 to 6 hours. When the charging LED turns from
yellow to green, it indicates that the battery charging is completed. Please unplug
the charger (adapter) in time, because overcharging will cause battery damage.
3. Only use the charger (adapter) supplied with the scale and indicator.
4.After charging, the battery does not last long, please contact the supplier to replace
new battery.