Rev 1.1, 18.09.2021
11
Assembly & Installation
The weighing scale is delivered in a partly dismantled condition. Assemble the
individual components in the following sequence:
•
Place your machine on a level, clean, and dry surface to obtain accurate
readings.
Connecting the AC Adapter
The following Safety recommendations must be observed when connecting the scale to
the mains:
The Scale should only be connected to the mains voltage socket with the power adapter
supplied. Check before connecting the power adapter to the mains socket, that the
operating voltage stated on the power adapter complies with the local mains voltage.
If the operating voltage is not the same as the mains voltage, the power adapter must
not be connected to the mains socket and contact customer service.
Placement of Scale
The location in which the scale is placed is very important in order for the scale to work to
its full potential. Certain conditions can affect the capabilities of the scale, conditions like:
the presence of air flow, variations in temperature, and direct sunlight. Please follow the
recommendations given below in choosing a location to place your scale.
•
Place the scale on a solid, firm and preferably vibration-proof, horizontal base
•
Make sure that the weighing machine cannot be shaken or knocked over
•
Protect from direct solar radiation
•
Avoid drafts and excessive temperature fluctuations
•
Avoid placing the scale near or on any magnetic surfaces