18
5.11 MINIMUM ZERO DISPALY SETTING
Minimum Zero Display need not be reset in general and was
set
before delivery, if need, the steps are shown as the
followings:
Notice: Minimum Zero Display “0” is only allowed to be set on
rules.
1. In the condition of power off, hold on
【
SMPL
】
key and press
【
ON/OFF
】
key to open function setting ,display “SET” on
weight screen and “0” on unit weight screen.
2. Input“1136” by numeric keys and press
【
SMPL
】
key to
display “Auto-Z” on weight screen, “1136” on unit weight
screen, “Minimum Zero Display” on count screen.
3. Press
【
1
】
key to change the different minimum zero display
(0-1-2-3), and select the required one, then press
【
SMPL
】
key to return in function setting interface.
4. Press
【
R
ETURN
】
key to count backwards, and return in
weighing interface.
5.12 LINEAR CALIBRATION
（
unapproved
）
There are three portions for linear calibration in the range of
scale capacity. The incorrect linear calibration method will
make errors so that the measured value will be influenced
