Luxxor Video System, Руководство пользователя

Страница: 4 / 10

Luxxor
®
Video System User Guide Luxxor
®
Video System User Guide
6 7
SeTup SeTup
Unscrew the protective plug from the
output receptacle on the front of the
Luxxor
®
35 LED.
Connect the other end of the Luxxor
®
Light Guide to your Hawkeye
®
borescope
by pushing it onto the light post of the scope until it clicks into place.
Make sure the Light Intensity/Power knob is set to OFF.
Connect the power supply:
1) Plug the output of the power supply into the jack on the rear of the Luxxor
®
35 LED light source.
2) Plug the small connector on the end of the power supply’s AC cable into
the power supply.
3) Plug the other end of the AC cable into a 100-240 VAC 50/60Hz outlet.
Insert the male end of the Luxxor
®
Light Guide fully into the output receptacle.
2
3
1