LUXX LIGHTING LUX-200-277-90, Руководство пользователя

Страница: 18 / 19

Luxx 200 LED Bar
IMPORTANT SAFETY INFORMATION. READ THIS INFORMATION AND FULL USER
MANUAL CAREFULLY PRIOR TO INSTALLING THIS PRODUCT.
Installation of the horticultural lighting structures described in this manual shall be performed by qualified personnel and are intended for
installation subject to approval by the authority having jurisdiction. Follow all installation, operation and maintenance instructions in the
complete user manual provided with this product.
Please note that failure to follow directions related to installation, use and/or maintenance may result in serious injury, death, or
property damage and will void the warranty, and the purchaser will be responsible for any and all repairs and/or damages incurred.
CAUTION - PROPRIETARY WIRING SYSTEM. Use Hawthorne/Luxx cord set model HGC906341 or HGC906342 only for connection
from the luminaire power inlet to a standard junction box for power connection.
ATTENTION - SYSTÈME DE C BLAGE PROPRIÉTAIRE . Utilisez le jeu de cordons Hawthorne modèle HGC906341 ou HGC906342
uniquement pour la connexion de l’entrée d’alimentation du luminaire à une boîte de jonction standard pour la connexion électrique.
MAXIMUM DISTANCE BETWEEN UNITS TO BE INTERCONNECTED: 4 M
DISTANCE MAXIMALE ENTRE LES UNITÉS À INTERCONNECTER: 4 M
MAXIMUM UNITS TO BE INTERCONNECTED: See manual.
MAXIMUM D’UNITÉS À INTERCONNECTER: Voir le manuel .
Install with a minimum 15 cm distance between adjacent lighting equipment and between the lighting equipment and
combustible materials such as walls, ceilings, movable partitions, and the like; and between lighting equipment and other heat
generating equipment.
Environment
The product is intended to be used in greenhouses and climate rooms. NOT FOR INTRACANOPY USE. The product can be used
in wet environments. The product may not be used outdoors. This luminaire is suitable for operation in an ambient temperature
not exceeding 40°C. This should be the maximum sustained temperature of the installed environment (ambient temperature)
that will ensure safe operation of the lighting equipment. To prevent sustained temperatures above a 40°C ambient a mechanical
ventilation or cooling system is required to maintain the temperature within the growing space at or below 40°C when the
luminaire is in operation.
Be sure cord sets or wiring harnesses:
1) Are not concealed or extended through a wall, floor, ceiling, or other parts of the building structure;
2) Are not located above a suspended ceiling or dropped ceiling;
3) Are not permanently affixed to the building structure;
4) Are routed so that they are not subject to strain and are protected from physical damage;
5) Are visible over their entire length; and
6) Are used within their rated ampacity as determined for the maximum temperature of the installed environment specified in the
instructions .
Connecting the LED fixture to the mains
Warning!
Make sure mains power is switched off.
Warning!
Ensure the cord is not coiled and does not touch any hot surfaces.
Warning!
Connect the cables according to local rules, safety regulations and electrical code.
Warning!
Ensure external switching gear can cope with the inrush current of the LED fixture (see section 3.2). Always use a
double-pole contactor suitable for switching a capacitive load. Never use household timers to switch the LED fixture!
Avertissement!
Assurez-vous d’éteindre l’alimentation au conducteur principal.
Avertissement!
Assurez-vous que le cordon n’est pas enroulé et qu’il n’est pas en contact avec des surfaces chaudes.
Avertissement!
Branchez les câbles conformément aux règlements locaux, aux règlements de sécurité et au code de
l’électricité
Avertissement!
Assurez-vous que l’équipement de commutation externe peut soutenir l’appel de courant du dispositif à
DEL (voir section 3.2). Toujours utiliser un contacteur bipolaire convenant à la commutation d’une charge capacitive. Ne jamais
utiliser une minuterie maison pour commuter le dispositif à DEL!