luxvision ET-185 Скачать руководство пользователя страница 4

 

have lock towards the up and down switch. 

!

 

Aim the two holes on the caster to the screw cap at the side of the base and insert. 

!

 

Put the instrument table on the flat ground. 

!

 

Screw the M10 screws with spring washers in the screw hole on the base through 
the hole on the foot frame, and fasten with hexagonal wrench. 

!

 

Put the worktable at the top of the instrument, unscrew four M8x20mm bolts with 
washers with spanner . 

!

 

Lift the worktable to aim its screw hole at the assembly hole of the instrument table. 

!

 

Put down the worktable, refasten the bolt securely with the spanner. 

 

3 PREPARATIONS 

!

 

Turn off the power switch

 

!

 

Insert the power plug of instrument table in suitable three core power socket, 
ensure that the instrument is well grounded

 

!

 

Turn on the power switch

 

!

 

Press the up and down switch, the table can move up and down

 

!

 

Keep on pressing the up and down switch, when the instrument table reach the 
limit position, the instrument table will stop automatically, This illustrates that the 
instrument is normal. Adjust table to the suitable height and then begin to use.

 

4 MAINTENANCE 

Daily maintenance 

!

 

Don’t store instrument in dusty place. 

!

 

When not using the instrument, turn off power switch and apply a dust cover. 

Содержание ET-185







Отзывы: