Simply Connected
© 2014 Luxul. All Rights Reserved.
Other trademarks and registered trademarks are the property of their respective owners
9
NOTE:
Go to
http://luxul.com/how-to-videos
for videos about
changing the IP address of your Operating System.
Connect a Client Device
Connecting a Wireless Client Device:
Connect the client device to the XAP-1230
default wireless network
LuxulXen1200
. This wireless network will run in Open
Security mode. A passphrase is not required until Wireless Security is configured.
Login
Login to the XAP-1230 with the following steps:
1. Open a Web browser, and enter 192.168.0.10. The access point login screen
will appear.
2. Enter the user name and password (default user name and default password
are both set as “admin”), and then click “OK” to login to the access point
configuration interface.
ADVANCED SETTINGS
For advanced settings information go to luxul.com
WARNINGS AND SAFETY INFORMATION
Verify that the electrical circuits have appropriate grounding and overload protection.
Attach only approved power cords to the device.