a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | p: 801-822-5450
User Guide
11
Reset
Button
Reset Button and LED Location
Status Indicators:
With the unit facing down and the base moved to the right as shown above, the
XAP-1040 has four LEDs, positioned horizontally on the bottom, left side of the
board. When viewed left to right, LEDs are as follows: 1) Bridge Mode (Green); 2)
WLAN Status (Blue); 3) LAN Link/Activity (Amber); and 4) Power (Green).
The following table describes the LED functionality:
Indicator Name
Description
Bridge Mode
On
Bridge is connected
Flashing
Bridge Mode enabled but not connected
Off
The AP is in default “Access Point” mode.
WLAN Status
On
The wireless radio is active and wireless
access is enabled
Off
The wireless radio is not active and wireless
access is disabled
LAN Link/Activity On
There is an active Ethernet connection
Flashing
Indicates Ethernet activity
Off
There is no active Ethernet connection
Power
On
The power is on
Off
No power, check power connections
At startup, the Green Power LED will stay on while the amber LAN Link light
fl ashes. The blue LED will come on once the XAP-1040 wireless radio is active.
