User Guide
4
© Copyright 2011 Luxul. All rights reserved. Trademarks & Registered Trademarks are property of respective holders.
1 INTRODUCTION
Congratulations on your purchase of the Luxul Xen™ Commercial Grade Dual
Directional 802.11n Wireless Access Point (XAP-1032). The XAP-1032 provides
superior directional Wi-Fi coverage in a sturdy and versatile metal enclosure for
deployment in post-construction residential and commercial Wi-Fi installations.
The XAP-1032 is designed to be placed inconspicuously above ceiling tiles, in an
attic, or other non-public indoor location. It has two directional antennas that can
be mounted and “aimed” towards the desired coverage areas—further optimizing
the Wi-Fi signal. Powered by Luxul’s Xen3D™ Technology, the XAP-1032 enhances
data throughput and coverage by as much as 400% over traditional Wi-Fi gear,
providing for whole home or small offi ce coverage with a single access point. With
this high performance wireless access point, computers and wireless devices that
are compatible with 802.11b/g and/or 802.11n can sustain maximum data rates and
improved overall performance at signifi cantly greater distances.
The XAP-1032 features Luxul’s XenSmart™ web based management interface.
XenSmart provides a powerful, yet simple method for setting up and optimizing
the wireless network. The XAP-1032 is also XenConnect™ enabled for optimal per-
formance and installation simplicity when deployed together with Luxul Routers,
Gigabit Switches, and other Luxul products.
XAP-1032 Features:
Implements Patented Xen3D™ Technology for Enhanced Throughput and
Coverage
Highest FCC Approved Performance (Effective EIRP 36dBm) for Farther Reaching
Signal and Maximum Data Rates
18dB of Receive Gain Increases Client Device Network Sensitivity and
Performance
Complies with 2.4 GHz IEEE 802.11n Standard. Backward Compatible with IEEE
802.11g/b
Supports WMM QoS Functionality to Prioritize Multimedia Traffi c
Enhanced Multi-Level Security with WPA-PSK (TKIP, AES, TKIP & AES), WPA2-PSK
(AES), WPA-PSK/WPA2-PSK Personal (TKIP & AES) and 128-bit WEP
Supports up to 8 SSIDs with Individual Security Settings
Multiple SSIDs Support VLAN Tagging (1 VLAN per SSID)
Single Cable Installation with PoE (supports both IEEE 802.3af and Legacy)
Firmware Upgradeable
