Pro-WAV™ 100 Lite QUiCK instALL GUiDe
The Pro-WAV 100 LiTe sysTem iNCLUDes The foLLoWiNg:
• Metal enclosure with space for mounting the EnGenius ECB3500
Internally
• Integrated X-WAV™ CP
(Circularly Polarized)
Antenna
(XW-24-FP7 - 7dBi High Gain 2.4GHz)
• Ethernet cable
• Coax cable (N-Male to RP-TNC)
• POE
(Power-Over-Ethernet)
injector and 48VDC Universal Input Power Supply
• Mounting hardware
• Ethernet pass through
• Velcro
• Quick Install Guide
geTTiNg sTArTeD: ADDiTioNAL iTem reQUireD
• EnGenius ECB3500 Wireless Access Point (WAP)
Included with the ECB3500: Wireless High power multi-function 7+1 AP (ECB3500), 12V/1A
Power Adapter, CAT5 UTP Cable, QIG, CD (User’s Manual), 5dBi 2.4GHz Dipole Antennas (2)
• External Ethernet cable from your data source/network (Max. length 329’ or 100 meters).
NOTE:
Disconnect all power before connecting or disconnecting any cables, coax or
antennas to or from this device. Failure to do so will void your warranty.
seTTiNg UP yoUr Pro-WAV 100 LiTe sysTem
Connecting the EnGenius ECB3500 to the Antenna
(diagram 1)
1. Remove the stock antennas from the antenna ports of the EnGenius ECB3500
and set them aside.
2. Connect the RP-TNC connector of the coax cable to the primary antenna port
1
.
3. Connect the N-Male connector of the coax cable to the antenna.
EXT ANT
EXT ANT
DC IN
RESET
RJ45/POE
PRIMARY
ANTENNA
PORT
1
diagram 1
moUNTiNg yoUr Pro-WAV 100 LiTe sysTem
The Pro-WAV 100 Lite system may be mounted to any surface using your fasteners. You
can also mount the unit above a drop ceiling using the optional drop ceiling mounting
mounts, Part Number HDW-PWM. See diagram 7 below for mounting options of the
Pro-WAV 100 Lite system.
diagram 7
Ceiling
Optional Drop
ceiling Mounts
Wall
