Pro-WAV™ 100 Lite QUiCK instALL GUiDe
your Pro-WAV Lite Wi-Fi system and position it for
use.
Direct Power Option:
(diagram 4)
1. Connect the Ethernet cable from your data
source/network to the pass through port on the
outside of the Pro-WAV Lite.
2. Connect the included Ethernet cable from the pass
through to the WAN port of the EnGenius ECB3500,
labeled RJ45/POE.
3. Decide where your Power Supply cord will enter
the Pro-WAV Lite enclosure.
4. Be sure the power supply is not connect to a
power source. Attach the EnGenius power supply
to the “DC IN” port of the EnGenius ECB3500.
Position your WAP in the enclosure and use the supplied adhesive
Velcro to affi x the WAP. You may now power your Pro-WAV Lite
Wi-Fi system and position it for use.
diagram 4
DC IN
RJ45/POE
(WAN)
EXT ANT
(PRIMARY)
EXT ANT
Power
Supply
seTTiNg The eCB3500 To The PrimAry ANTeNNA PorT oNLy
Consult your EnGenius ECB3500 documentation to access the WAP Confi guration Soft-
ware. Confi gure the ECB3500 to use only the Primary Antenna Port. Using the Left side
navigation tree, navigate to the Wireless\Wireless Advanced Settings (diagram 5)
1
. In
the Wireless Advanced Settings dialog box set the Antenna drop down to “1” (diagram 5)
. Then apply your change.
2
1
(Consult your ECB3500’s documentation for more details on WAP Confi guration. Contact EnGenius directly
for additional support or warranty information).
diagram 5
Ethernet
Power
Coax
