Luxul AMS-1208P, Быстрая настройка

Страница: 25 / 32

23
Bridge Priority: „Allows„you„to„set„the„Bridge„Priority.„Priority„values„are„Descending„(i.e.„100„has„a„higher„priority„than„
1000).„The„Bridge„Priority„plus„the„MSTI„Instance„concatenated„with„the„6-byte„MAC„Address„of„the„Switch„forms„the„
Bridge„Identifier.„In„MSTP„this„is„the„priority„of„the„CIST.„We„do„not„recommend„changing„this„value„without„consulting„
a„knowledgeable„Network„Administrator.
Forward Delay: „Allows„you„to„set„the„delay„used„when„Transmitting„Root„and„Designated„Ports„BPDU.„The„valid„
range„is„4-30„seconds„with„a„default„of„15„seconds.„We„do„not„recommend„changing„this„value„without„consulting„a„
knowledgeable„Network„Administrator.„
Max Age:
„Allows„you„to„set„the„Maximum„Age„of„the„BPDU„Transmitted„by„the„Root„Bridge.„The„valid„Range„is„6-40„
seconds„with„the„default„of„20„seconds„(MaxAge„must„be„<=„(FwdDelay-1)*2).„We„do„not„recommend„changing„this„value„
without„consulting„a„knowledgeable„Network„Administrator.
Maximum Hop Count: „Allows„you„to„set„the„number„of„Remaining„Hops„for„STP„BPDUs„generated„at„the„boundary„
of„an„MSTP„region.„The„valid„range„is„6-40„hops.„We„do„not„recommend„changing„this„value„without„consulting„a„
knowledgeable„Network„Administrator.„
Transmit Hold Count: „Allows„you„to„set„the„number„of„BPDUs„a„Bridge„Port„can„send„per„second.„When„per„second„
limit„is„exceeded„the„transmission„of„the„next„BPDU„will„be„delayed.„The„valid„Range„is„1-10„BPDUs„per„second.„We„do„
not„recommend„changing„this„value„without„consulting„a„knowledgeable„Network„Administrator.„„
Advanced Settings
Edge Port BPDU Filtering: „Allows„you„to„set„whether„a„Port„explicitly„configured„as„an„Edge„Port„will„Transmit„and„
receive„BPDUs.„
Edge Port BPDU Guard: „Allows„you„to„set„whether„a„Port„explicitly„configured„as„an„Edge„Port„will„Disable„itself„„
upon„reception„of„a„BPDU.„If„Enabled„he„Port„will„enter„the„Error-Disabled„State„and„will„be„removed„from„the„„
active„topology.„
Port Error Recovery:
„Allows„you„to„set„whether„a„Port„in„the„Error-Disabled„State„can„automatically„re-enabled„itself.„If„
Recovery„is„not„enabled„Ports„have„to„be„Disabled„then„Re-enabled„for„normal„STP„operation„to„resume.„The„condition„
is„also„cleared„by„a„system„Reboot.„
Port Error Recovery Timeout: „Allows„you„to„set„the„Port„Error„Recovery„Timeout.„The„valid„Range„is„30-86400„seconds.
c
X
Save: cClickctocsavecanycunsavedcchanges.
c X
Reset: cClickctoccancelcanycunsavedcchangescandcrevertctocpreviously-savedcvalues.cNotcavailableconcecchangescarecsaved.