
ENG - 35
•
SCREEN SAVER
If the SCREEN SAVER is set ON and the unit is switched on without a disc playing for seve-
ral minutes, a moving picture appears on the screen and the unit will go to standby mode
after 20 minutes. You can press the [STANDBY] key on the remote controller to activate.
•
LAST MEMORY
When this function is ON, the unit can memorize the time elapsed from the last time you
played the disc. When playing next time, it will resume playing from the memorized time.
AUDIO SETUP PAGE:
• ANALOG AUDIO SETUP:
DOWNMIX:
LT/RT:
The audio out is Left and Right channel formatting even if the original sound is 5.1CH
format.
System Setup
STEREO:
The audio out format is stereo even if the original sound is 5.1CH format.
3D SURROUND:
The audio out is virtual surround sounds (only for 5.1CH player)
5.1CH:
Turn off DOWNMIX function. If playing 5.1CH discs or the unit is connected with 5.1
channel amplifier, this item should be selected.(only for 5.1CH player)
•
FRONT, CENTER, REAR and SUB-WOOFER SPEAKER: (No this item in 2CH player)
If your speaker system includes the above speakers, you can set these items according the
real speaker status.
•
DIALOG:
The DIALOG mode is available, and you can press up and down direction key
to adjust it. (In the DOWNMIX mode, LT/RT or STEREO is selected.)
D.R.C:
The D.R.C can control data record. You can chose AUTO, ON and OFF in this mode.
DIGITAL AUDIO SETUP PAGE:
•
DIGITAL OUTPUT::
SPDIF OFF:
No digital output(coaxial off), only analog audio output.
ALL:
If this item is selected, you can set up RAW.
PCM ONLY:
In SPDIF/PCM mode, setup PCM channel according to your preference.
•
LPCM OUT
Select PCM frequency at 48kHz or 96kHz.
Note: Some amplifiers don’t support 96kHz sampling which will effect the coaxial output.
•
DOLBY DIGITAL SETUP:
•
DUAL MONO:
Stereo: Set audio output to the stereo output.
L-mono: Set audio output to the mono-left channel.
R-mono: Set audio output to the mono-right channel.
Mix-mono: Set audio output to the mix-mono channel.
•
DYNAMIC
Select this to reduce the overall volume and still keep defined audio sound.
You can press up and down direction key to adjust it.
ENG
Содержание AV 719
Страница 44: ......