19
Electrical Diagram
This appliance is equipped with a three pronged (grounding) plug for your protection against
shock hazard and should be plugged directly into a properly grounded three prong
receptacle. Do not cut or remove the grounding prong from this plug
Resistor Adjustable
Thermal disk (close on rise)
Fan Motor
G
L1(BK)
L2 (W)
Electrical Schematic
This appliance, when installed, must be
electrically grounded in accordance with
local codes or, in the absence of local
codes, with the National Electrical Code,
ANSI/NFPA 70, or the Canadian
Electrical Code, CSA C22.1.
CAUTION: Label all wires
prior to disconnection when
servicing controls.
Wiring errors can cause
improper and dangerous
operation.
VERIFY PROPER OPERATION
AFTER SERVICING
Optional Fan Kit
Each kit contains:
-Fan assembly with mounting
gasket
-Grounded electrical harness
-Rheostat & thermal switch
fan kit p/n FK-SG
