Luxor LX940323DDL, Руководство по эксплуатации

Страница: 106 / 117

English - 105 -
Parental Settings Menu Operation
Select an item by using “ • ” or “ ” button.
Use “ • ” or “ ” button to set an item.
Press • OK button to view more options.
Menu Lock : Menu lock setting enables or disables
the menu access. You can disable access to the
installation menu or the whole menu system.
Maturity Lock : When set, this option gets the maturity
information from the broadcast and if this maturity level
is disabled, disables access to the broadcast.
Child Lock : When Child Lock is set, the TV can only
be controlled by the remote control. In this case the
control panel buttons will not work, except for the
Standby Off/On button. When Child Lock is activated
you are able to switch the TV into Standby mode with
the Standby Off/On button. To switch the TV on again,
you need the remote control. Hence, if one of those
buttons is pressed, Child Lock Is On will be displayed
on the screen when the menu screen is not visible.
Set PIN : Defines a new PIN number. Use numeric
buttons to enter a new pin number. You will need
to code your new pin a second time for verification
purposes.
IMPORTANT : The factory default pin number is 0000 ,
if you change the pin number make sure you write it
down and keep it safe.
Timers
To view Timers menu, press MENU button and select
Settings icon by using “ ” or “ ” button. Press OK
button to view Settings menu. Use “ ” or “ ” button
to highlight Timers and press OK to continue:
Setting Sleep Timer
This setting is used for setting the TV to turn off after
a certain time.
Highlight Sleep Timer by using “ • ” or “ ” button.
Use “ • ” or “ ” button to set. The timer can be
programmed between Off and 2.00 hours (120
minutes) in steps of 30 minutes.
Setting Programme Timers
You can set programme timers for a particular
programme using this feature.
Press “ ” button to set timers on an event. Programme
timer function buttons will be displayed on the
screen.
Adding a Timer
Press • YELLOW button on the remote control to
add a timer. The following menu appears on the
screen:
Channel : Changes network type by using “ ” or “ ”.
Timer Type : You can select timer type as Record
or Timer.
Date : Enter a date using the numeric buttons.
Start: Enter a starting time using the numeric
buttons.
End : Enter an ending time using the numeric
buttons.
Duration : Displays duration between the starting and
ending time.
Repeat : Sets a timer to be repeated as Once, Daily or
Weekly. Use “ ” or “ ” buttons to select an option.
Change/Delete : Sets the change/delete
permission.
Playback : Sets the playback permission and parental
settings.
Press • GREEN button to save the timer. Press RED
button to cancel.
Change/Delete: Controls parental settings on timers.
Editing a Timer
Select the timer you want to edit by pressing “ • ”
or “ ” button.
Press
• GREEN button. Edit Timer menu screen will
be displayed.
When finished with editing, press •
GREEN
button to
save. You can press MENU button to cancel.
Deleting a Timer
Select the timer you want to delete by pressing “ •
” or “ ” button.
Press
• RED button.
Select • YES by using “ ” or “ ” buttons to delete the
timer. Select NO to cancel.
Recording Configuration
Select Recording Configuration item in the Settings
menu to configure recording settings. The following
menu is displayed for recording configuration.