Luxman PD-171A, Руководство пользователя

Страница: 9 / 28

BELT DRIVE ANALOG PLAYER PD-171A
7
4. Rotation speed selection switch (33/45)
This switch toggles the rotation speed of the platter be-
tween 33 rpm and 45 rpm.
Select a rotation speed in accordance with a record to listen
to.
5. Strobo Scope
This window shows the number 33 or 45 depending on the
number selected by the rotation speed selection switch. If
the number is motionless, the rotation speed is fine-tuned.
6. Rotation speed fine control
(33/45 speed control)
33 rpm Fine-tunes the rotation speed. Please look into the
stroboscope and fine-tune until the number 33
completely stops moving, when the rotation speed
switch is set to 33.
45 rpm Fine-tunes the rotation speed. Please look into the
stroboscope and fine-tune until the number 45
completely stops moving, when the rotation speed
switch is set to 45.
7. Stylus light connector (light)
This light can illuminate stylus area in a dark room.
Remove the dustproof cap and mount the supplied stylus
light.
8. Pulley cover
This cover protects the rotating pulley.
Be sure to mount the cover when the platter is rotated.
9. Center spindle
This spindle is a guide for mounting a record.
For playing an EP record, mount the EP adaptor here.
10. Belt
This belt transfers motor rotation to the platter.
11. Rubber mat
This rubber mat suppresses platter squeaks and brings a
record into intimate contact with the platter.
12. Headshell
Headshell couples a cartridge with the tone arm.
13. Arm lifter
This lifter is used to move the tone arm vertically.
14. Anti-skating adjustment knob
This device cancels the inward force applied to the tone arm
during record playback.
Select a number in accordance with the cartridge to be
used.
15. Counterweight
This weight is used for adjusting tone arm balance and sty-
lus pressure.