Luxman M-10X, Руководство пользователя

Страница: 9 / 20

7
STEREO POWER AMPLIFIER M-10X
14. Balanced input terminal
(INPUTS BAL LINE)
XLR connector input terminal to receive balanced audio sig-
nals of a line level. Connect these terminals to the balanced
inputs of a unit such as a preamplifier using balanced XLR
cables.
Audio input signals coming to BAL LINE are selected with
the input button on the front panel and delivered. To enjoy
sound playback properly, set the phase inverter switch in
accordance with the phase of the balanced output of the
input device such as a control amplifier.
When BTL (MONO) is selected, only signals from the L side
are valid. Therefore, securely connect the left channel out-
put terminal (L side) of the input device to the L side input
terminal of the M-10X for the left channel and the right
channel output terminal (R side) of the input device to the L
side input terminal of another M-10X for the right channel.
Signals from the R side input terminal are not provided.
15. AC inlet (AC IN)
Connect the supplied accessory power cable here to power
the unit from an AC wall outlet.
16. Speaker terminals (SPEAKERS)
Connect the left speaker to the L side speaker terminal of
this unit and the right speaker to the R side speaker terminal
given the polarity.
At this moment, securely connect the
!
terminal of the
speaker system to the speaker terminal
!
(red) of this unit,
and the
@
terminal of the speaker system to the speaker
terminal
@
(black) of this unit.
Speaker systems with impedance of 4-16 Ω can be con-
nected to this unit.
When BTL (MONO) is selected, this unit turns into to a mon-
aural power amplifier. Therefore, either a right or left speaker
system can be connected exclusively. If stereo playback is
desired, another M-10X is required. When BTL (MONO) is
selected, securely connect the
!
terminal of the speaker
system to the
!
terminal (red) (BTL
!
) of the L side speaker
terminal of this unit, and the
@
terminal of the speaker sys-
tem to the
@
terminal (red) (BTL
@
) of the R side speaker
terminal of this unit.
Speaker systems with impedance of 8-16 Ω can be con-
nected to this unit in the BTL mode.
17. Trigger input terminal (TRIGGER IN)
Trigger input terminal to be connected to a control amplifier,
power amplifier and other devices that have a trigger output
terminal. If the main power button is set to ON/STANDBY
and this unit is turned to standby, this unit can be turned
to operating or standby in conjunction with the operation
button of a connected device.
When the main power button is set to OFF, this unit does
not operate in conjunction with other devices.
18. Trigger output terminal (TRIGGER OUT)
Connection of this trigger output terminal to a device (such
as an M-10X) having a trigger input terminal enables the
connected device to turn to operation or standby in con-
junction with this unit.
Memory reset
All settings can be restored to the factory defaults by the
following steps:
(1) Turn the power supply to standby.
(2) Perform the following operations while pressing the
display button.
(3) Turn on the operation button.
(4) The input indicator, LINE and BAL LINE light up in
5 seconds.
(5) Press the input switch once.
(6) The power supply turns to standby.
(7) Release the display button.
That’s all for memory reset.
Factory default
Item Default
Input LINE
Display
At STEREO
Power meter light ON
Power meter display ON
At BTL (MONO) Power meter right and left
lights ON
Power meter display ON (left)