4
Luxier Rev.2 05/2018
Installation
16
17
19
18
20
C
A. Shut off water supply at the valves.
Remove old faucet and clean the
mounting surface for installation of new
faucet.
D. Install counter weight (23) onto pull
out hose (12). Connect the pull out
hose to water inlet tube (21). Be sure
to install rubber washer (20). Do not
overtighten the connection.
F. Turn on water supply to check for
leaks at all connection. Remove spray
head from the pull out hose and let the
water run for about 1 minute and check
for leaks. Reattach the spray head.
E1. Apply Teflon (TPFE) tape on the shut
off valves. Thread the tape in counter-
clockwise direction.
E2. Use Wrench to tighten the water
supply hoses, please do not overtighten
the connections.
B. Insert the hoses and shank through
the hole. The faucet hole on the
mounting surface should be 1 1/2” in
diameter.
C. Remove the 2 screws (20) from
locking nut (19). From under the sink,
install the rubber washer (17), steel
washer (18) and locking nut (19) onto
the shank (16) Tighten the locking nut
with a basin wrench or the socket tool
and install the 2 screws (20) to secure
the faucet in place.
23
12
12
21
22
D
E1
Flexible water supply line
E2
F
01. Temperature Indicator
02. Setscrew
03. Handle
04. Cap
05. Bonnet
06. Cartridge
07. Sprayer
08. Check Valve
09. Washer
10. Sprayer Connector
11. Retainer
12. Pull Out Hose
13. Spout
14. Body
15. EVA Washer
16. Shank
17. Rubber Washer
18. Steel Washer
19. Locking Nut
20. Screws (x2)
21. Water Inlet Tube
22. Rubber Washer
23. Counter Weight
24. Water Supply Hoses
(non-removable)
A
B
01
03
04
05
06
07
08
09
10
11
12
13
14
15
24
16
17
18
19
20
22
23
21
02
