LX114
V. 01 – 18/09/2014
4
©Velleman nv
3.
General Guidelines
Refer to the
Velleman
®
Service and Quality Warranty
on the last pages of this manual.
Keep this device away from dust and extreme temperatures. Make sure the ventilation
openings are clear at all times. For sufficient air circulation, leave at least 20" (at least
50 cm) in front of the openings.
Protect this device from shocks and abuse. Avoid brute force when operating the
device.
Familiarise yourself with the functions of the device before actually using it. Do not allow operation
by unqualified people. Any damage that may occur will most probably be due to unprofessional use
of the device.
All modifications of the device are forbidden for safety reasons. Damage caused by user modifications
to the device is not covered by the warranty.
Only use the device for its intended purpose. All other uses may lead to short circuits, burns,
electroshocks, lamp explosion, crash, etc. Using the device in an unauthorised way will void the
warranty.
Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and
the dealer will not accept responsibility for any ensuing defects or problems.
Mechanical wear and LEDs are not covered by warranty.
A qualified technician shall install and service this device.
Do not switch the device on immediately after it has been exposed to changes in temperature.
Protect the device against damage by leaving it switched off until it has reached room temperature.
This device is designed for professional use on stage, in discos, theatres, etc.
Use the appropriate power supply (see Technical Specifications below).
Lighting effects are not designed for permanent operation: regular operation breaks will prolong their
lives.
Keep this manual for future reference.
4.
Features
The LX114 is a super-slim LED PAR equipped with 7 tunable white LEDs of 6 W. You have full control over
the colour temperature, from warm to cold white tones, keeping high brightness all over the chromatic
range. The ultra-thin design and the absence of fans are major improvements compared to traditional
models. Easy to set up. Suitable for use in exhibitions, theatres, conference halls, showrooms, etc.
7 x 6 W high-power warm/cold white LEDs with colour temperature control
DMX control via 2, 3 or 7 channels for simple or advanced controlling
o
2-channel mode: warm white, cold white
o
3-channel mode: dimmer, warm white, cold white
o
7-channel mode: dimmer, warm white, cold white, shutter, auto programme, auto speed,
dimmer curve
built-in programs with speed adjustment
static colour selection
master/slave mode for synchronized operation of multiple units linked in a chain
flicker-free operation (400 Hz)
clear LCD display for easy menu setting
5.
Overview
Refer to the illustrations on page 2 of this manual.
1
mounting bracket
6
control panel with display
2
locking knob
7
fuse holder
3
DMX input
8
powerCON input
4
DMX output
9
powerCON output
5
grounding
10
safety eye
