Luxia Oceano 35, Руководство по эксплуатации и обслуживанию, Страница: 37 / 116

OCEANO 35/40/50/60
Operating and service manual
pag. 37 di 116
English
Connection of the rinse aid measure to the rinse
aid container (
b ) is made by means of the proper
tube ( a ).
For machine models with built-in automatic (d)
liquid detergent measure (optional)
For machines equipped with this device you must
proceed as follows:
1) Prepare a clear tank ( c ) with the detergent
close to the machine.
2) Insert the aspirating tube ( d ) into the detergent
container, making sure that filter ( e ) at its end is
clean and in good conditions.
The device is automatically activated when water
fills the machine and the washing cycle starts.
17 - CONNECTING THE RINSE AID MEASURE AND DETERGENT
The machine environment must be suitable for its
operation and comply with current health and
safety regulations.
Recommendations on prevention measures to
be taken by the user:
The working area where the machine is placed
and operates must be large enough to allow a
person to pass by even if the machine door is
open.
Machine manual controls - description:
1)
Machine start-up button (with colour indicator
of machine ON).
2) Starting cycle button (timer).
3) Tank heating up light.
4) Washing start light.
18 - START-UP, TESTING, CONTROLS AND RUN-IN
Before starting up the machine, check that the water (loading and unloading) and electricity connections
have been carried out according to the regulations contained in the “INSTALLATION” chapter.
ERGONOMICS
When using the machine the operator should follow common ergonomic principles.
MACHINE TRIAL
All machine functions have already been fully tested in the factory, before machine delivery.
RUN-IN
The machine does not need any run-in.
19 - CHECKS TO BE CARRIED OUT BEFORE THE FIRST START-UP
d
1
2
3
4
c
a
b
d