- 19 -
Setting - Alarms
This display is for learning and setting alarm devices. The panel can connect with up to 8 alarm
devices.
Adding:
1. Select the type of the alarm. There are 7 types of alarm items for selection:
1) PIR: A passive infrared occupancy detector.
2) Contact Detector: A door/window magnetic contact detector.
3) Remote Control: A remote control with intruder panic slide switch on the right side.
4) Doorbell: A doorbell.
5) Sounder: A siren that will sound loudly when a detector is triggered.
6) Panic: An alarm device for triggering emergency condition.
7) Chime: An alarm device that will emit pleasant chime sound when triggered.
2. Select an available slot for the device. If you want to replace an old device, you need to
“remove” the old device first to free up the slot.
3. Tap on the “Add” button to start code learning.
4. Operate the device for code learning. Complete the registration with the alarm device.
5. If the learning is successful, you are able to set up the title and location of the device:
Type in the message bar to change the title of the alarm. Select the location of the device and
press “OK” to complete setting.
6. The device’s icon will occupy the slot assigned and the learning is done.
Removal:
On the panel’s screen, select the icon of the to-be-removed device and tap the “Remove” button.
Follow the on-screen instructions to remove the device.
Note:
Set the system to Disarm
mode before adding/removing
alarm devices.