Product Name:
PolyStone Cottage Free Standing Electric Fireplace Heater Mantel with Remote
SKU #:
Email: [email protected]
Instruction Manual
Please save this manual for future reference.
”
FLAME EFFECT
Push
“ON/OFF”
(On/Off) button (B) or
“ON/OFF”
(On/Off) button (M) on the remote control to begin flame effect. The red
power light “
and dimmer light “ ” will automatically come on. The flame effect can be adjusted by pressing the dimmer
“
” button (C) or dimmer “
” button (L) on the remote control. When pressed, the red light will blink and the flame effect
will cycle from high to low. Press the dimmer “ “ button (C) or dimmer “
“ button (L) on the remote control again to lock
in desired flame brightness. The red light “ “ will remain on. This brightness will be kept until the dimmer “
” button (C)
or dimmer “
” button (L) on the remote control is pressed again.
HEAT SETTING
1.
Turning on Master Power Switch (A) and
“ON/OFF”
(On/Off) button (B) or
“ON/OFF”
button (M) on the remote control
2.
Press
“LOW”
button (D) or
“LOW”
button (K) on the remote control to active the low heater setting. The red light above
will indicate that the heater is functioning on low.
3.
Press
“LOW”
button (D) or
“LOW”
button (K) on the remote control again to shut off the heater.
4.
Press
“HIGH”
button (E) or
“HIGH”
button (J) on the remote control to active the high heater setting. The red lights
above
“LOW”
and
“HIGH”
buttons will indicate that the heater is functioning on high.
5.
Press
“HIGH”
button (E) or
“HIGH”
button (J) on the remote control again to shut off the heater.
Note
When the heater begins to work, it will give off cool air for about 10 seconds before the heating function is activated
Using the Remote Control
This heater includes a remote control. To operate the appliance using the remote control, the Master Power Switch (A)
must be the
“ON”
position. See below for directions to use the remote control:
WHIF993