GB
31
Scope of delivery
Assembly
Suction pipe A and Suction pipe B
Figure 2 – Page 3
– Undo the screws (15)
– Insert suction pipe B (3) into the device (16) and
secure with screws (15).
– Insert suction pipe A (2) into suction pipe B (3)
and secure with screws (15).
– Insert the suction connection (1) into suction
pipe A (2) and secure with screws (15).
Collection bag and shoulder strap
Figure 3 – Page 4
– Fit the coupling element (17) into the lower
opening of the device.
Figure 4 – Page 4
– Attach the collection bag (14) to the device.
Figure 5 – Page 4
– Attach the shoulder strap (6) to the hook (5) of
the device.
Using for the first time
Filling with fuel-oil mixture
Figure 6 – Page 4
– Rotate the tank lid (12) anti-clockwise and open.
– Fill the fuel-oil mixture into the tank. (pay atten-
tion to the maximum tank capacity: see
– Rotate the tank lid (12) clockwise and close.
Operation
Personal protective clothing – Page 29
Check before starting the device!
Check the safety equipment and make sure the
device is safe for operation:
– Check to make sure all parts are secure.
– Check to make sure there are no visible defects:
broken parts or cracks etc.
Adjusting the device
Vacuuming or blowing
Figure 7 – Page 4
– Set the setting lever to (13) Vacuum (A) or
Blow (B).
Set the vacuuming/blowing speed
Starting the device (cold)
Figure 8 – Page 4
– Push the On/Off switch (4) to "I".
– Actuate the fuel pump (10) six times until fuel
flows into the plastic bladder.
• If after actuating the fuel pump six times, the
bladder still does not contain fuel, continue to
actuate until the fuel flows.
– Set the choke lever (9) to the
position.
– Pull the starter cord (8) forcefully several times.
– Push the choke lever (9) to the
position.
– Pull the starter cord (8) again several times until
the motor starts.
• Operating instruc-
tions
• Leaf vacuum/blower
• Spanner set
• Screw set
• Collection bag
• Shoulder strap
• Suction pipe
Danger of fire!
Fuel is flammable! Do
not spill fuel. Switch off the motor of
the device and allow to cool down
before refilling. Observe all of the
safety notes for handling fuels (see
).
Device damage!
The unit is delivered
without fuel-oil mixture. Fill with fuel-oil
mixture before using the device for the
first time. Mix the fuel and two-stroke
oil before filling the tank.
Note:
Observe the prescribed fuel-oil
). Observe the mixing
ratio (see
).
Risk of injury!
The device may only be
put into operation if there are no
defects. If a part is defective, it must be
replaced before the device is used
again.
Device damage!
Vacuuming, blowing
of heavy materials such as metal,
stones, branches, pine cones or bro-
ken glass is to be avoided.
Note:
Work with the leaf blowers/vac-
uums is not allowed during customary
rest periods.
476965_Laubblaeser_Benzin.book Seite 31 Mittwoch, 2. November 2016 4:16 16