21
– Thoroughly wash the paint mixing glass
with water or suitable solvent (in accord-
ance with the type of paint used).
– Fill the paint mixing glass with a little
water or suitable solvent, connect the
spray stylus again and spray until empty.
– Repeat this process until all traces of
paint are gone.
Troubleshooting
What to do when something doesn’t
work…
Malfunctions are often caused by minor
faults. You can easily remedy most of these
yourself. Please consult the following table
before contacting the vendor. You will save
yourself a lot of trouble and possibly money
too.
If you can’t fix the fault yourself, contact your
nearest vendor. Please be aware that any
improper repairs will also invalidate the war-
ranty and additional costs may be incurred.
Disposal
Disposal of the appliance
This appliance must not be disposed of with
regular household waste! Dispose of the
appliance in the appropriate manner. For
more information, consult your community
waste disposal service.
Note:
The compressed air nozzle (3)
and paint nozzle (4) may also be
unscrewed for cleaning.
DANGER! Risk of injury!
Unprofes-
sional repairs may mean that your
device will no longer operate safely.
This endangers you and your envi-
ronment.
Error/Fault
Cause
Remedy
Device does not work.
No pressure?
Check the pressure system,
connection and hoses.
No pressure or low pressure is
generated.
Contamination in the system? Check the connections, check
the pressure system.
Leakages?
Inspect all connections and
hoses for leak-tightness or
blockage.
Interrupted paint spray or in-
termittent paint output.
Paint almost run out?
Refill with paint.
Too high a viscosity?
Thin the paint.
Paint nozzle loose?
Tighten the paint nozzle.
Holding the spray stylus incor-
rectly?
Correct the holding angle.
Spray pattern not complete.
Compressed air nozzle con-
taminated?
Clean the compressed air noz-
zle.
Paint nozzle contaminated?
Clean the paint nozzle.
Spray pattern irregular with
drips.
Unsuitable paint?
Use a suitable paint mixed to
the correct ratio.
Paint nozzle defective?
Contact your local vendor.
Too high a viscosity?
Thin the paint.
Too little working pressure?
Increase the working pressure.
Compressed air hose defec-
tive?
Contact your local vendor.
GB
Airbrushpistole_101107.book Seite 21 Mittwoch, 6. April 2016 2:40 14
