NOTE: The Fan Mode switch only works if your system provides a wire for the
thermostat’s “G” wire terminal, to control a blower fan. The Fan Mode switch
has no effect in systems that do not have a blower fan (such as a hot water
radiator system).
TOUCHSCREEN MENU CONTENTS:
• SET DAY/TIME
• SET/REVIEW “HEAT/COOL” PROGRAMS (not present in OFF mode)
• SET/REVIEW FILTER USAGE
• REVIEW “HEAT/COOL” ENERGY USAGE (not present in OFF mode)
• SET/REVIEW SWING VALUE
• SET KEYBOARD LOCK CODE (not present in OFF mode)
• SET “HEAT/COOL” TEMPERATURE STOP (not present in OFF mode)
• TEMPERATURE SETBACK (not present in OFF mode)
SET DAY AND TIME:
Press the MENU button. The first menu item shown is “SET
DAY/TIME”, press the OK button. With the day flashing, press UP or DOWN to set
the day of the week. Press NEXT and the clock time will start flashing. Use UP
or DOWN to set the time, making sure the AM/PM indication is correct. Holding
the UP or DOWN buttons will make the clock digits scroll rapidly. Press the EXIT
button to return to the Normal Run screen.
HEATING AND COOLING
: Basic operation of your heating or cooling system can
be obtained by choosing either HEAT or COOL on the System Mode switch. Touch
the Set Temperature digits on the screen and they will begin to flash. While they
are flashing, the UP and DOWN buttons will be shown also, which you can use to
adjust the current Set Temperature. When the thermostat is first powered up, it
will follow a default temperature routine that is preset from the factory (shown
below), until the clock has been set.
21
OPERATING INSTRUCTIONS:
