background image

If you have any problems installing or using this thermostat, please carefully and
thoroughly review the instruction manual. If you require assistance, please
contact our Technical Assistance department at 856-234-8803 during regular
business hours between 8:00AM and 4:30PM Eastern Standard Time, Monday
through Friday. You can also receive technical assistance online anytime day or
night at http://www.luxproducts.com. Our website offers you troubleshooting
guides, answers to the most common technical questions, and also permits you
to email your questions to our technical support staff at your convenience.

If this unit fails because of defects in materials or workmanship within three
years of the date of original purchase, LUX will, at its option, repair or replace it.
This warranty does not cover damage by accident, misuse, or failure to follow
installation instructions.  Implied warranties are limited in duration to three years
from the date of original purchase.  Some states do not allow limitations on how
long an implied warranty lasts, so the above limitation may not apply to you.
Please return malfunctioning or defective units to the location from which the
purchase was made, along with proof of purchase.  Please refer to “TECHNICAL
ASSISTANCE” before returning thermostat.  Purchaser assumes all risks and
liability for incidental and consequential damage resulting from installation and
use of this unit.  Some states do not allow the exclusion of incidental or
consequential damages, so the above exclusion may not apply to you.  This
warranty gives you specific legal rights and you may also have other rights,
which vary from state to state.  Applicable in the U.S.A. and Canada only.

Mercury is considered to be a hazardous material.  If this product is replacing a
thermostat that contains mercury in a sealed tube, contact your local waste
management authority for instructions regarding recycling and proper disposal.
It may be unlawful in your state to place it in the trash.

34

TECHNICAL ASSISTANCE:

LIMITED WARRANTY:

MERCURY WARNING AND RECYCLING NOTICE:

Содержание SMART TEMP TX9600TSa




































Отзывы: