Luvion PRESTIGE TOUCH, Инструкция по эксплуатации

Страница: 15 / 31

15
LUVION
Premium Babyproducts
Problem Solution
No video from the baby
unit
1. Check all connections to the baby unit. Make sure the power adapter
is plugged in.
2. Make sure that both the baby and parent unit are switched on.
3. Make sure that the baby unit is in range of the parent unit.
4. When you are using batteries, try replacing them.
5. Pair the parent unit with the baby unit (see chapter on pairing)
The video is dropping/
Out of Range message
1. Move the baby unit closer to the parent unit.
2. Try repositioning the baby and/or parent unit to improve the
reception.
3. Place the antenna of the parent unit in the vertical position.
4. Pair the parent unit with the baby unit (see chapter on pairing)
Audio problems 1. Make sure that the volume on the TV is switched on.
2. Make sure that there is sound within range of the baby unit
microphone.
3. Make sure the parent unit is not in the zoom or quad mode.
4. If the unit emits a loud screeching noise, move the baby and parent
unit further apart.
The video is or has become
choppy
The video may become choppy when a lower frame rate is experienced
(i.e. 10 frames per second instead of 20 frames per second).
1. Try moving the baby unit closer to the parent unit.
2. Remove obstructions between the baby and parent unit.
3. Place the antenna of the parent unit in the vertical position.
The video appears to be
grainy when using the AV
out function to view the
video on a large screen TV/
monitor
The use of the AV output is for convenience only. When it is used in
combination with a large screen TV or monitor, the video might be
grainy as the camera limits the video resolution to VGA (640 x 480
pixels). This is not a product defect.
1. For the best video quality use the PIP (Picture in Picture) function of
your TV or monitor. Check your TV or monitor product manual to see if
this feature is available on your TV or monitor.
2. View the video on a smaller screen TV or monitor.
TROUBLESHOOTING
If you have any problems with the Prestige Touch, there is often a quick and simple solution.
Please try the following:
TECHNICAL SPECIFICATIONS
Parent unit
Recieving frequency range 2.400GHz ~ 2.482GHz
Data rate 1.5 Mbps
Recieving sensitivity -81dBm
Demodulatie type GFSK with FHSS
Resolution H: 480 V: 234
Viewing angle H: 70° V: 65°