Luvion 16-920-908, Инструкция по эксплуатации

Страница: 5 / 20

5 LUVION
Premium Baby products
EN
INTRODUCTION
Thank you for purchasing the Luvion White Noise Speaker. Make sure you always keep your
original proof of purchase. For warranty cases you will always be asked to show a copy of your
proof of purchase. For warranty claims you can contact the Luvion dealer or the local Luvion
representative. More information can be found at www.luvion.com
This manual contains all the information you need to be able to use this Luvion White Noise
Speaker safely and with pleasure. Before using the White Noise Speaker, we recommend that you
read this manual carefully. We ask for your extra attention for the safety instructions.
IMPORTANT SAFETY PRECAUTION AND MAINTENANCE INSTRUCTIONS
Please note the following precautions before usage. Failure to comply may be dangerous.
•
WARNING: CHOKING HAZARD - Keep the USB adapter cable out of the reach of chil-
dren! NEVER place the USB cable within 1.5 meters of the crib / bed or a playground.
•
Please charge the product at least 2 hours prior to use;
•
Please keep the product away from high temperature and high humidity environments;
•
Please clean the product with a soft dry cloth. Do not use any abrasive or volatile cleaners.
•
Do not clean the base with acid or alkaline liquids;
•
Do no attempt to dissemble, repair or modify this product without written authorization
from the manufacturer;
•
The working voltage of this product is 5V, please use the included USB cable;
•
Do not immerse the product nor the USB cable in water;
•
Do not expose the speaker to solvent;
•
Do not attempt to repair or dissemble the speaker;
•
This is not a toy;
•
If you do not use the speaker for long periods of time, be sure to store it in a dry place, free
from extreme temperature, humidity and dust.
FIRST SET UP
•
Plug the included USB Cable into a power adapter. Then plug the other end of the USB
Cable into the White Noise Speaker; Please note: there is no 220v adapter included;
•
Please make sure to charge the speaker before use. It is recommended to charge at least 2
hours prior to (fi rst) use.
HOW TO USE
1.
Use the ON/OFF switch to power on the White Noise Speaker (3)
Please note: The USB cable can also be plugged into a PC or laptop to power the unit. This
White Noise Speaker does not support USB audio; the USB cable is only used to provide
power the unit.
2.
Press the arrow button (1) to choose the type of sound you wish to listen to
3.
Press the volume buttons (4 and 5) to adjust the volume
4.
Slide the (sleep) timer switch (7) to set a sleep timer or select continuous play. The optional