Ethernet/IP bus interface for DIOLINE20 Vers. 1.00
Safety instructions
5/45
1 Safety instructions
Importance of operating instructions
The operating instructions are an integral part of the DIORAIL module product and must be kept ready
to hand at all times. This applies until the module is disposed of. If the module is sold or lent out, the
operating instructions must be passed on with it.
Copyright
These operating instructions are only intended for the operator and its staff. The contents of these
instructions may not be forwarded, reproduced, used or otherwise imparted, either in full or in part,
without express permission.
Infringements may result in criminal convictions.
Disclaimer
We have checked the contents of this document for conformity with the hardware and software
described. Nevertheless, as discrepancies cannot be ruled out we do not accept liability for complete
conformity. The information in this document is checked regularly and any necessary corrections are
made in the subsequent editions. We are grateful for any suggestions for improvements.
Friedrich Lütze GmbH & Co. excludes all liability for damage caused by a lack of or insufficient
familiarity with the operating instructions. The operator is therefore advised to get written confirmation
that staff are fully versant with the instructions.
Modifications or functional changes to the Ethernet/IP bus interface for DIOLINE20 are not permitted
for safety reasons. Modifications to the Ethernet/IP bus interface for DIOLINE20 not expressly
approved by the manufacturer will thus forfeit any liability claims against Friedrich Lütze GmbH & Co.
The same applies if non-original parts or equipment, or parts and equipment not approved by us, are
used.
Correct use
Correct use means proceeding as described in the operating instructions.
The Ethernet/IP bus interface for DIOLINE20 may only be used for the scenarios provided for in the
technical documents and only in conjunction with the third-party equipment and components
recommended and approved by us.
Correct and safe operation of the product assumes proper transport, proper storage, assembly and
installation and careful operation and maintenance.
