Ethernet/IP bus interface for DIOLINE20 Vers. 1.00
Description of device
12/45
4.1 Technical data of Ethernet/IP bus interface for DIOLINE20
Process bus
interface:
Bus system:
Ethernet compliant to
IEEE 802.3
10/100BaseTx
Module type:
Ethernet/IP
communication adapter
Transmission medium:
2 x twisted pair cat. 5
compliant to IEEE
standard
Bus connection:
4-pin M12 socket
D-coded (X1 and X2)
Field bus interface:
L-Bus bus system
Maximum 10 I/O
modules can be
connected to the
L-Bus interface.
RS232 interface:
X4:
Male multipoint
connector, SUB-D,
9-pin UNC (M3 optional)
Environmental test:
EMC emitted
interference/
interference immunity:
EN 50121-3-2
Insulation coordination:
EN 50124-1
Vibration/shock
resistance:
EN 61373
Category 1
Class B
Cold/hot/climate
EN 50155
Supply unit:
Supply voltage:
24 V DC (range
16.8 V - 30.0 V)
Residual ripple:
max. ±10 %
Charging rate at
DC 24 V:
nom. 140 mA
at 16.8 V DC
200 mA plus charging
rate of individual I/O
interface;
protected in the event of
a malfunction (internal
short circuit or overload
at L-Bus connector)
by 2 A fuse
(10*I
N
for 100 ms or 5*I
N
for 1s).
If optional configuration
is used without internal
fuse, then the power
supply must be
appropriately protected
by an external fuse.
Connected by 5-pin cage
tension spring X3 with
pressure point
Polarity reversal
protection: yes
Potential isolation:
Cutoff voltages:
Ethernet/IP and
electronic
AC 1500 V
RS232 and electronic
AC 500 V
