LCOS Unmanaged Switch
▪
Mounting / Dismounting
29
T R A N S P O R T A T I O N
9.2
Mounting
The LCOS Unmanaged Switch has protection class IP20 when installed and is
therefore suitable for use in control cabinets. The device is designed to snap onto
/ snap onto a 35 mm DIN rail (also called TS 35 - according to DIN EN 60715).
A top-hat rail is a mounting rail with a U-shaped or hat-like profile. In English the
DIN rail is called DIN rail.
9.2.1
Safety notices Environment
The device may only be installed by competent and qualified personnel.
This work step may only be carried out by at least trained personnel in
compliance with the safety regulations.
The device may only be operated at the specified ambient temperature
and at the specified relative humidity (non-condensing).
Select the mounting location so that the climatic limit values specified in the
technical data are observed.
Use only in an environment up to pollution degree 2 (IEC 60664-1).