Lutz Size 1 - 1/4", Руководство по эксплуатации

Страница: 55 / 60

55
GB
7. Trouble shooting
Air is applied to pump but pump is not starting
. Clean filters and debris from all fluid lines.
. Make sure all valves on fluid lines are open.
3. Inspect diaphragms for rupture.
4 Air pressure must not be below .4 bar.
Pump is pumping but not priming
. Check all suction line connections for leakage.
. Inspect check valves for wear or debris.
3. Suction lift specifications may be exceeded.
4. If fluid is viscous use larger suction lines.
Leakage
. Retorque all fasteners to specified torque requirements.
. Replace o-rings.
3. Inspect diaphragms for rupture.
Low Flow rate
. Confirm air pressure and air capacity at the air valve as required.
. Check for leaks in suction line or obstructions in lines.
3. If fluid is viscous use larger suction lines.
Air in discharge lines
. Check for leaks in suction lines.
. Inspect diaphragms for rupture.
Erratic cycling
. Inspect check valve seats for debris.
. Inspect fluid lines for debris.
3. Automatic valves must be properly functioning.
4. Viscosity of product may be changing.
Premature destruction of wetted components
. If fluid is abrasive slow down pump or increase size of pump.
. Filter fluid for sharp objects.
3. Make sure fluid is compatible with wetted materials.