Lutz SafetyBox, Перевод оригинальной инструкции

Страница: 8 / 16

8
0697-101 SafetyBo
x - 10/19
en
2.2 Proper use
The SafetyBox monitors the tightness of the pump tubes. A sensor detects an impermissibly leaked
electrically conductive liquid and indicates this by means of an optical and an acoustic signal.
The SafetyBox may only be used in combination with pumps from Lutz Pumpen.
• The SafetyBox can be used in the following environments:
- on roofed surfaces
- in open and closed rooms
• Observe following technical data:
Voltage 230V ~
Frequency 50 Hz
Max. switching current: 8 A
Protection class IP 54
Ambient temperature -10 – 50 °C
Altitude up to 2000 m
Material housing PC
Material sensor Stainless steel 1.4571, PVC
Weight with sensor 1050 g
Minimum conductivity of the detectable liquid 10 µS/cm
Sensitivity adjustment range 5 – 100 kΩ
Prevention of obvious misapplication (examples)
• Do not immerse SafetyBox in liquid.
• Do not operate the SafetyBox in explosion hazard area.