Lutz JESCO C 7523, Руководство по эксплуатации

Страница: 22 / 40

Control
Controls
22
© Lutz-Jesco GmbH 2015 BA-24721-02-V01
Chlorine gas changeover unit C 7523 Operating instructions
8 Control
8.1 Controls
8.1.1 Operator controls of the control unit
All operating states are displayed on the control.
Fig. 15:
M
Control elements
Position Description Meaning
1 LED red Left battery empty
2 Keys Acknowledge the cylinder change left
and switch left manually
3 LED green Left battery full
4 LED green Operation left battery
5 LED yellow Motor works
6 LED green Operation right battery
7 LED green Right battery full
8 Keys Acknowledge the cylinder change
right and switch right manually
9 LED red Right battery empty
Table 17: Control elements
8.1.2 Motor operating elements
Fig. 16: Motor operating elements
Position Description Meaning
1 Selector lever MAN Manual operation
AUTO Automatic operation
2 Plug small Position switch
3 Plug large Voltage supply
4 Operating light Continu-
ous light Automatic operation
Flashing Manual or fault
OFF No voltage
5 Hand lever Manual operation, if the selector lever
(1) is set to MAN
Table 18: Motor operating elements
8.2 Operating modi
8.2.1 Automatic operation
Control element Position
Switch SW2 on the circuit board OFF
Selector lever on the motor AUTO
Table 19: Set automatic operation
When in automatic operation, the changeover unit reacts to the switching
status of the contact gauge. When receiving notification that the current
supply battery is empty, the changeover unit changes to the standby
battery.
7
9
8
3
1
2
4 5 6
1
2
3
4
5