Lutz 0212-100, Руководство по эксплуатации

Страница: 3 / 72

GB
3
Explanation of the operating unit
1 Unit of measurement used for flow volume (litres, US-gallons, IMP-gallons).
2 Unit of measurement used for flow rate (l/min, US-G/min, IMP-G/min).
3 Reset key for the displayed flow volume.
4 Start key for filling operation in the automatic mode.
Store key to transfer correction factors in the addressable memory.
5 Stop key to interrupt filling operation in the automatic mode.
Recall key to display calibration factors from addressable memories.
6 Changeover switch to access the higher-level function in dual-function keys.
„S“ 12 is indicated in the display.
7 Switching between manual and automatic mode.
In the automatic mode, the word „AUTO“ 13 is indicated in the display.
8 Reduced flow rate. „SLOW“ 16 is indicated in the display.
9 Numerical keypad 0-9.
10 Display of total volume as long as key remains depressed.
Activation of calibration mode. „CAL“ 17 is indicated in the display.
11 Display of flow volume in the selected unit of measurement as long as key remains depressed.
Key for confirming values (e.g. correction factor, preselected volume).
12 „S“ indicates that the SHIFT key has been pressed, making the higher-level function
(in keys no. 4,5,7,8,10,11 ) effective.
13 „AUTO“ indicates that the flow meter is operating in the automatic mode.
14 „START“ indicates that an automatic filling sequence has been started.
15 „STOP“ indicates that an automatic filling sequence has been interrupted.
16 „SLOW“ indicates that a step-by-step flow reduction has been activated.
17 „CAL“ indicates that the flow meter currently is in the calibration mode.
18 „BATT“ indicates that the batteries require changing.
19 Battery arrangement when changing the batteries.
20 Battery compartment lid.
21 Terminal socket for data line.