2
|
Lutron
®
24/7 Technical Support—800.523.9466
product specifications
06.28.12
369539b
Lutron
R
Comfort Controls
TouchPRO Wireless
R
Thermostat
Specifications
Model Number
LR-HWLV-HVAC
Power
24 V
~
IEC PELV / NEC
R
Class 2
Typical Power
Consumption
820 mW
Test conditions: 24 V
~
input, backlight on full, four relays active.
Regulatory Approvals
FCC, IC, COFETEL
Environment
Ambient operating temperature: 0 ºF to 120 ºF (-18 ºC to 49 ºC), 5% to
90% humidity, non-condensing. Indoor use only.
Communications
TouchPRO Wireless
T
Thermostat communicates with the system
through Radio Frequency (RF) and must be located within 30 ft (9 m) of
a repeater. System devices operate on frequencies between 431.0 MHz
and 437.0 MHz.
ESD Protection
Tested to withstand electrostatic discharge without damage or memory
loss, in accordance with IEC 61000-4-2.
Surge Protection
Tested to withstand surge voltages without damage or loss of operation,
in accordance with IEEE C62.41-1991 Recommended Practice on
Surge Voltages in Low-Voltage AC Power Circuits.
Power Failure
Power failure memory: should power be interrupted, the TouchPRO
Wireless
T
Thermostat will retain its programming when power is
restored.
Mounting
Mount on a wall using conventional thermostat mounting methods.
Wiring
IEC PELV / NEC
R
Class 2, 22 AWG (0.5 mm
2
) to 18 AWG (0.75 mm
2
)
solid wiring. Requires transformer common connection or THP9045
Wiring Module (included).
Warranty
For warranty information, please see the Warranty enclosed with the
product, or visit www.lutron.com/resiinfo
Warranty only valid if installed by a properly trained climate control
specialist.
