Page 5
3
3.1
Assigning Shades/Drapes to the Two Group Remote
(Type C)
Complete step 2 before proceeding.
Shades/drapes must be assigned to the master group
before they can be assigned to subgroups 1 and 2. Shades/drapes assigned to sub group 1
and 2 will still respond to the master shade/drape group commands sent from the type A and
B remotes.
Enter Programming Mode
Aim the Remote at the IR Receiver
and Press and Hold Open and
Close buttons for 5 seconds. The
LED’s on the receiving device
will flash
3.2
Enter Assignment Mode
Aim the Remote at the IR Receiver
and tap the Close button. All
unassigned shades/drapes will
open and all assigned drapes/
shades will close.
3.3
H
T
For Group 1
H
T
For Group 2
H
H
C
C
C
C
Assigning and unassigning
shades/drapes
Select Shade
Aim the Remote at the IR Receiver
and tap the Close button until the
desired shade/drape is selected
(Tapping the open button will
select shades/drapes in the
opposite order). Selected shade/
drape will “wiggle” or move back
and forth a few inches
continuously.
T
T
C
C
Then
Sivoia QED
®
Favorite Preset Remote
Programming Guide
