26
EcoSystem
®
Programmer
Setting Up Scenes for Wall Controls
Wall controls can be set up to activate scenes (preset light levels). A
different scene can be configured for each button on the control.
Note that all wall controls in a given group will operate the same.
1
1 From the Main Menu, tap
D
De
evviic
ce
e S
Se
ettu
up
p and then
IIR
R R
Re
ec
ce
eiivve
err//W
Wa
allll C
Co
on
nttrro
oll.
2
2 Read the instructions, then
tap
to continue.
3
3 Point the programmer at any
IR receiver and tap
to
begin communication.
4
4 If all fixtures go to minimum
brightness and a fixture
connected to a wall control
flashes, tap
.
5
5 Scroll to the wall control to be
set (its group of fixtures will
flash). Tap
to configure the
selected control.
6
6 Select S
Siin
ng
glle
e B
Ba
alllla
as
stt or A
Allll
B
Ba
alllla
as
stts
s and tap .
7
7 If the ballasts flash and then
go to a scene level, tap
.
8
8 Select the number of the
scene to be set (scene 1
matches the first button on the
control, scene 2 matches the
second button, and so on).
9
9 If fixtures for this control go to
their selected scene level, tap
.
1
1
5
5
6
6