6) In DOSE mode ,Setting current date or current time surely.
(please refer to chapter 6-1 page 17)
pressing and holding the
▲
button , display is shown
and the BEG , x.xx ,A ,FAST,%DOSE,FAST(xx.xx hm) and then
pressing and holding the
▼
button , display is shown and the BEG
, xx .xx (xx ,dd - h : m) and END
xx - xx : xx(dd - h : m) , pressing
▲
or
▼
button to set
the BEG(begin time) , pressing TIME button to setting next vaule
, pressing ENTER button to save the setting and leave the
setting , pressing
▲
button once to check the set state.
If user wants to record %dose every day.Please use the
▼
button
to select R BEG , then press RUN button,
If user wants to rerun %dose Function .Please use the
▲
button
and
▼
button > 2 sec. to reset dose value and time.
If user wants to change RUN or Pause Function.Please press the
FUNC button and Enter button to release KEY LOCK.
4-3 Data Hold
During the SPL measurement, press the " HOLD Button " ( 3-2,
Fig. 1 ) once will hold the measured value & the LCD will
display a " HOLD " symbol.
Press the " Hold Button " once again will leave the data
hold function.
4-4 Data Record ( Max., Min. reading )
1) The data record function records the maximum and
minimum readings. Press the " RUN Button ( REC ) " ( 3-3, Fig.1 )
once to start the Data Record function and display
is shown the" REC " symbol .
9
