2)If select the upper to " yES ", press the " Enter Button
" ( 3-4, Fig. 1 ) once again, the Display will show text
" yES Enter " to confirm again, if make sure to do the
SD memory card format, then press " Enter Button "
once will format the SD memory clear all the existing
data that already saving into the SD card.
6-2 Set the input channel No.
When the lower display show " Input "
1)Use the " Button " ( 3-5, Fig. 1 ) or " Button "
▲
▼
( 3-7, Fig. 1 ) to set the input channel No. ( 1 to 9 ).
2)After set the channel No, press the " Enter Button " (
3-4, Fig. 1 ) will save the setting function with default.
Remark :
* The meter can set max. 9 channels data input with
default.
* The channel No. ( 1 to 9 ) is depend your meter's
character.
14