Suppose you already set the meter to accept 4 channels
input, if intend to show the channel 3, channel 4
value, then during execute the Datalogger function ( the
lower LCD show text " Datalogger " with flashing ), then
press " Channel Button " ( 3-5, Fig. 1 ) once will show
the channel 3 value, press " Channel Button " once again
will show the channel 4 value.
Remark :
How to set the channel No., refer to Chapter 6-2, page 14.
4-6 LCD backlight ON/OFF
Press the " Backlight ON/OFF Button " (3-3, Fig. 1 " once
will turn Off the LCD backlight. Press the " Backlight
ON/OFF Button " (3-3, Fig. 1 " once again will turn ON the
LCD backlight again.
4-7 To check the sampling time
It do not execute the Datalogger function.
If press " Set Button " ( 3-8, Fig. 1 ) once , the lower
LCD display will present the sampling time.
5. Download the saving data from the
SD card to the computer ( EXCEL
software )
1)After execute the Data Logger function, take away the
SD card out from the " SD card socket " ( 3-9, Fig. 1 ).
2)Plug in the SD card into the Computer's SD card slot
( if your computer build in this installation ) or
insert the SD card into the " SD card adapter ". then
connect the " SD card adapter " into the computer.
11