b. When connected as shown in Fig. 3, a reverse check
on the diode is made. If the diode under test is
good, " OL " will be displayed. If the diode under
test is defective, " .000 " or other numbers will be
displayed. Proper diode testing should include both
steps a. and b. above.
Fig. 3
5-8 Capacitance Measurement
1) Connect BLACK test lead into " COM " terminal ( 3-9,
Fig. 1 ).
2) Connect RED test lead into " Ω " terminal ( 3-8, Fig. 1 ).
3) Select the " Function rotary switch " ( 3-7, Fig. 1 ) to
the " Ω " position.
4) Power On the meter by pressing the " Power On/Off
button " ( 3-4, Fig. 1 ) once, the Display will show "
SMART ", the meter is under " Smart " mode for
capacitance measurement.
5) The meter can measure the capacitance value automatically
and with auto range selection.
13