5-4 AC Current Measurement
1) Select the " Function switch " ( 3-7, Fig. 1 ) to the
" A " position.
2) Power On the meter by pressing the " Power On/Off
button " ( 3-4, Fig. 1 ) once, the Display will show
" AC " , " A " and " AUTO " indicator, now the meter is
under " Auto range " current measurement.
3) Press the " Trigger " ( 3-2, fig. 1 ) to open the
" Current Sensor Jaws " ( 3-1, Fig. 1 ) and clamp on
the measured conductor, the display will show the
measurement ACA current value automatically ( auto range ).
Data hold for Current measurement
1) During the current measurement, if press the " Hold button "
( 3-5, Fig. 1 ) will freeze the measurement current value.
In the same time the Display will show " " and
" MANU " indicator.
2) Push the " Hold Button " again to release the data hold
function.
Remark :
The Data Hold operation is only available for the
" ACA measurement ", not available for other
functions.
5-5 Voltage ( ACV/DCV ) measurement
1) Connect BLACK test lead into " COM " terminal ( 3-9,
Fig. 1 ).
2) Connect RED test lead into " V " terminal ( 3-8, Fig. 1 ).
3) Select the " Function switch " ( 3-7, Fig. 1 ) to
the " V " position.
10