7-7 Set sampling time ( Seconds )
When the Display's text " SP-t " is flashing
1)Press the " Enter Button " ( 3-4, Fig. 1 ) once,
use the " Button " ( 3-5, Fig. 1 ) or " Button " (
▲
▼
3-6, Fig. 1 ) to adjust the value ( 0, 1, 2, 5, 10, 30,60,
120, 300, 600, 1800,3600 seconds ).
Remark :
If select the sampling time to " 0 second ", it is ready
for manual Datalogger.
2)After the Sampling value is selected, press the
" Enter Button " ( 3-4, Fig. 1 ) will save the setting
function with default.
7-8 SD memory card Format
When the Display's text " Sd-F " is flashing
1)Press the " Enter Button " ( 3-4, Fig. 1 ) once,
use the " Button " ( 3-5, Fig. 1 ) or " Button " (
▲
▼
3-6, Fig. 1 ) to select the upper value to " yES " or
" no ".
yES - Intend to format the SD memory card
no - Not execute the SD memory card format
2)If select the upper to " yES ", press the " Enter Button
" ( 3-4, Fig. 1 ) once again, the Display will show text
" yES Ent " to confirm again, if make sure to do the
SD memory card format, then press " Enter Button "
once will format the SD memory clear all the existing
data that already saving into the SD card.
21