10
USING THE POLISHER
DIRECTIONS :
Wash and dry your car completely .Pull vehicle into covered
area,Evaluate the surface to determine which products ar necessary ,Choose the correct
product .Apply product to pad ,place machine on surface ,turn machine on and begin
ap p l y i n g pr o d u c t .( D o no t tu r n ma c h i n e on un t i l it is on th e su r f a c e ! )
work product evenly and thoroughly into surface .Re-apply product sparingly to
pad as needed ,Remove product with a clean ,dry ,high quality cotton terry cloth
or microfiber towel by hand.
.
Fig.6
Fig.7
USAGE TIPS
■
Never run the polisher while the padis
off the surface of the vehicle,Always
start and stop machine with the pad on
the work surface (Fig,5)
■ Use
light to
moderate
pressure on
machine when applying product.
■ Polisher
works best on speed settings
Between 3-5.
■ Apply product sparingly directly to the
pad in an
＂Ｘ＂
Pattern(Fig.6).
■ Work on completely cool surface and
in shade .
■ When using a cleaner or polish ,apply
to one panel at a time and remove the
product the product -do not allow to dry .
■ When applying a wax/paint protection ,
apply to entire car,let product dry to a
haze ,then remove .
■ Mark each pad to avoid mixing products
to previously used pads .
CLEANING THE PAD
Hold machine so that the pad is facing up,
While applying light pressure using your
index and middle finger inside a clean towel
(Fig.7), turn machine on to clean product out
of the pad ,The pad should be cleaned at the
end of the job while pad is still moist with
product ,For best results clean pad prior to
storing ,Also ,clean pad again at the start of
the next usage while pad is still dry.
.
Fig.5
