Lutool LT62063, Инструкция по эксплуатации

Страница: 6 / 13

2
1 APPLICATION
Depending on which accessory mounted this power tool is intended for dry sanding small
areas and for sawing, scraping polishing, rasping, cutting and separating.
WARNING! Read this manual and general safety instructions carefully
before using the appliance, for your own safety. Your power tool should
only be passed on together with these instructions.
2 DESCRIPTION (FIG A)
1. Quick release lever
2. Quick release clamp
3. Oscillation frequency controller
4. On/Off switch
5. Vent holes
6. Plunge cut saw blade
7. Segment saw blade with recess
8. Shovel blade
9. Sanding plate
3 PACKAGE CONTENT LIST

Remove all packaging materials.

Remove remaining packing and package inserts (if included).

Check that the package contents are complete.

Check the appliance, the power cord, the power plug and all accessories for transportation
damage.

Keep the packing materials as far as possible till the end of the warranty period. Dispose it
into your local waste disposal system afterwards.
WARNING: Packaging materials are not toys! Children must not play with
plastic bags! Danger of suffocation!
1 x oscillating tool
1 x sanding plate
5 x sanding sheets
1 x grain 100
2 x grain 120
1 x grain 240
1 x grain 60
1 x plunge saw blade
1 x scraper
1 x segmented saw blade
1 x dust adapter connection
1 x dust adapter
1 x Manual
If any parts are missing or damaged, please contact your dealer.
4 SYMBOLS
In this manual and/or on the machine the following symbols are used:
Denotes risk of personal
injury or damage to the tool.
Wear ear guards and goggles
Read manual before use Wear gloves