85
SPO2
Sensor
disconnected
SpO2 sensor drops down
from the patient or
monitor.
Low
Ensure the sensor is fixed on the
patient‘s finger or other locus and
that the monitor is normally
connected with the cable.
SPO2
module
initialization wrong
SpO2 module wrong
High
Stop
use
of
SpO2
module
measurement function and advise
the biomedicine engineer or User
Service Dept.
SPO2
module
initialization wrong 1
SPO2
module
initialization wrong 2
SPO2
module
initialization wrong 3
SPO2
module
initialization wrong 4
SPO2
module
initialization wrong 5
SPO2
module
initialization wrong 6
SPO2
module
initialization wrong 7
SPO2
module
initialization wrong 8
SPO2
module
communication stop
SpO2 module wrong or
communication mistaken
High
Stop
use
of
SpO2
module
measurement function and advise
the biomedicine engineer or User
Service Dept.
SPO2
module
communication wrong
SPO2 alarm limit wrong
Function/safety faulty
High
Stop
use
of
SpO2
module
measurement function and advise
the biomedicine engineer or User
Service Dept.
PR alarm limit wrong
Function/safety faulty
High
Stop
use
of
SpO2
module
measurement function and advise
the biomedicine engineer or User
Service Dept.
Prompt Message (including general warnings):
Reminders
Causes
Alarm Levels
SPO2 Measurement out of
scope
SpO2 measured value is out of range
High
PR Measurement out of
scope
PR measured value is out of range
High
Seek pulses
SpO2 module seeks pulse.
No alarm
Pulse not found
SpO2 module can‘t find SpO2 signal.
High
13.9
Maintenance & Cleaning
Warning
Users must turn off the equipment and shut down the AC power supply before cleaning the
